Technical Professional with 10 years of experience seeking challenging assignments as Planning and Project Control Engineer(Construction Planning Electromechanical Scope)/BSS Engineer/ Telecom Transmission Engineer/ RF Engineer/ Telecom Team Lead/ Telecom O&M Engineer/ Telecom related Executive or Consultant.
Adopt project management tools and techniques like project planning & scheduling using project management tools like Primavera P6(EPPM and PPM) Rel.8.2 & 8.3.
Project Coordination and work progress monitoring by using Primavera P6.
Expertise in BSS & Transmission, Telecom CM & PM, RF, Telecom O&M.
Recently Attended 3G (RF Related) Training conducted by Huawei.
Well versed in multi vendor tools like NSN (Local Maintenance Terminal (291, 290, 285), Local Craft Terminal, Win Power Silver (Eltek and Power One Rectifiers) and Huawei (iManager M2000, BSC 6900 Web LMT, CME Express, Performance Report System (PRS), iManager Nastar).
Thrives in an ever-changing, fast-paced environment with the unique ability to focus on the big picture without losing sight of the details.
Highly organized, disciplined and task focused with fine-tuned analytical, troubleshooting and administrative skills.
This project is a part of Jabal Omar Development Project Phase 4, Zone S9, S10 & S11 based in Makkah Saudi Arabia. This project consists of 8 stories Podium with seven towers of 23 stories each where our Company is a contractor at this Project and Hill International is the the Project Management Client.
Job Profile:
Incorporate the approved changes into schedule which may result in revised baseline, including changes to Sequence of activities, scope, cost, duration, and resources.
Implementing schedule adjustments based on resource availability.
Responsible to make daily/weekly/monthly Project Progress Reports.
Meeting with the Contractors to discuss and review their work progress and report the findings in writing to the Project Managers.
Coordination with vendors / sub-contractors throughout the project for timely achieving of mile-stones as per contract and to ensure the timely delivery of equipment / material on site.
Identifying critical path activities which have a critical potential impact on project’s schedule.
Familiar to Design a WBS (Work Breakdown Structure) and utilize it to develop project plans using Primavera P6
Sequencing the activity by defining dependencies and identifying the constraints in order to develop logical relationships between activities.
Attend & coordinate with site personals regarding the planning & progress.
Preparation of weekly and monthly progress, perform progress analysis, schedule updating, monitoring.
Can revise the Baseline Schedule whenever there is a change in the scope or the Sequence of work.
Job Profile:
Familiarize to adjust schedule using lead lag adjustment technique in the critical path.
Be able to sequence the activities and can identify whether the relationships and dependencies are logical or not.
Responsible of generating overall cluster and zone reports.
Monitoring and identifying the areas where low progress and gain of work is observed.
Involved in HUAWEI PTML UFONE 3G & 2G Rollout Project including 3G & 2G roll-out optimization and Huawei BSC6900 Web LMT, CME Express, PRS, M2000 and rest of its of tools for both 3G & 2G.
Verify/ implement Neighbors (Internal and External) Plan on RNC and BSC through LMT apart from planning & executing expansions for GSM 900, GSM 1800 and GSM (900 to 1800). Conduct audit of DB and Neighbor of whole network for 3G and 2G.
Coordinate with various teams including NSS, Transmission Planning, RF Planning and Optimization.
Involved in BSC cutover activities & validation through Drive Testing and OMC Database.
Conduct Drive Test analysis for newly On-Air sites and Optimization issues.
Resolve RF Optimization issues like bad KPIs (High DCR, Low HSR, Low CSSR, TCH call drop etc) and parameters changes in coordination with RF Department.
Perform Site Neighbors audit, LAC audit and definitions to optimize HSR degradation.
Verify 3G & 2G Cell Parameters through CME on BSC.
Update knowledge of WCDMA, GSM, GPRS, EDGE Call flows, Counters and Parameters.
Perform Power Properties settings like Power level, Power Type and Power Fine tune.
Involved in WAP implementation, RNC/BSC DB audit on weekly basis, TCH availability issues tracking, tracking of Path Balance issues, alarm monitoring & faulty TRX escalation, new site DB verification, expansion site DB audit, new site DT coordination, BSC software upgrade coordination and KPI monitoring, Daily Cell Busy, Cluster busy and Cluster Hour stats circulation and Cluster monitoring. Prepare Neighbor Plan.
Have Knowledge of 3G KPIs
Job Profile:
Responsible for whole zone progress including Electrical and Mechanical activities.
Responsible for the coordination between different scope of work during the site operation.
Involved in planning the completion of activities.
Team Lead for HUAWEI TELENOR MS Project involved in mobilization & movement, Office management and coordination with the customers, various vendors, sub-contractors of various Government Departments.
Involved in weekly co-ordination meeting with the Customer.
Accountable for 345 BTS sites including TELCO and Non-TELCO (Power & Infrastructure P&I), preparation of Alarm Rectification Reports.
Support NOC in alarm monitoring, MSC cutover, Inter BSC and Inter MSC Rehoming.
Rendered technical supervision to all team members in the region.
Managed 345 BTS sites, 3 C-BSCs, 3 E-BSCs and 48 TRAUs through a team of 10 Engineers, 29 Technicians and Riggers.
Focused on rectification of issues like congestion, CSSR, DCR etc in coordination with RF optimization team to ensure maximum TCH availability.
Rectify media (ABIs, SDH, PDH & other transmission) related issues in coordination with the Transmission team.
Involved in BTS, BSC and Inter MSC Cutover (Rehomings) and expansion of TRAUs and TRXs.
Coordinated with HR in official matters.
Job Profile:
Implementing schedule adjustments based on resource availability.
Able to update the Revised Baseline schedule based on the site progress.
BSS & Transmission Engineer for TELENOR Pakistan project involved in handover of sites (BTS; BSC and MSC) from the Mobile Operators.
Conducted audit of corrective & preventive maintenance of BTS, BSC and MSC done by different Sub cons besides focusing on BTS, TRAU and BSC Rehomings.
Managed CM of the entire network (300+ sites) including power & infrastructure to maximize site uptime as well as critical internal & external alarms of BTS, BSC in coordination with particular vendor or Sub cons.
Resolved faults related to the Transmission and BSS platforms (including Microwave, IDU, ODU and other indoor and outdoor equipments in coordination with the NOC.
Managed sub contractors for resolution of issues (power & infrastructure including generators) on immediate basis.
Installed, commissioning & maintenance of BTS (Siemens), IDU (Sral XD), ODU (Siemens).
Conducted routine visits on BTS cell sites and Co-locations (daily, weekly & monthly) for preventive maintenance.
Maintained proper record of snags & escalate issues to respective departments.
Managed operation of E-BSC & C-BSC & their connected sites, worked on LMT EVOLUTION (291,290 & 285) and LCT.
Updated knowledge on DUAMCO, DULNA, DUVSWR, FCU & CU (both GSM & DCS).
Installed & commissioned DUAMCO, DULNA, DUVSWR, FCU & CU (both GSM & DCS) using LMT EVOLUTION (291, 290, 285).
Installed LISO cards, MCP, AP, SMAC and all other related equipments of Siemens E-BSC.
Managed daily cell level stats and maximized value through resolution and rectification of cell level related issues.
Planned movement of teams for sites and functioned as acting team lead in the absence of team leader.